Send documentation comments to mdsfeedback-doc@cisco.com
22-22
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show cfs
show cfs
To display Cisco Fabric Services (CFS) information, use the show cfs command.
show cfs {application [name app-name] | lock [name app-name] | merge status name app-name]
| peers [name app-name] | status [name app-name]}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example shows how to display CFS physical peer information for all applications.
switch# show cfs peers
Physical Fabric
--------------------------------------------------
Switch WWN IP Address
--------------------------------------------------
20:00:00:05:30:00:61:de 172.22.46.223 [Local]
20:00:00:0d:ec:08:66:c0 172.22.46.233
20:00:00:05:30:00:f1:e2 172.22.46.225
20:00:00:05:30:00:eb:46 172.22.46.222
application Displays locally registered applications.
name app-name Specifies a local application information by name. Maximum length is 64
characters.
lock Displays the state of application logical or physical locks.
merge status Displays CFS merge information.
peers Displays logical or physical CFS peers.
status Displays if CFS distribution is enabled or disabled. Enabled is the default
configuration.
Release Modification
2.0(1b) This command was introduced.
2.1(1a)
• Added status keyword.
• Replaced vsan with fctimer for the fctimer application in the
Application field in the command output.
3.0(1) Modified the show cfs application example with output that shows which
applications support CFS distribution over IP and Fibre Channel and those
that support only CFS distribution over Fibre Channel.
To Next Page
Loading...
Need help?
General
