Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
6-29
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 6 Debug Commands
debug fc-tunnel
debug fc-tunnel
To enable debugging for the Fibre Channel tunnel feature, use the debug fc-tunnel command in EXEC
mode. To disable a debug command, use the no form of the command or use the no debug all command
to turn off all debugging.
debug fc-tunnel {all | errors | external-events | ha | label-update | mts {pkt | pkthdr} {both | rx
| tx} | pss | route-update [vsan vsan-id] | rsvp-messages [tunnel tunnel-id | vsan vsan-id] |
state-machine}
no debug fc-tunnel {all | errors | external-events | ha | label-update | mts {pkt | pkthdr} {both
| rx | tx} | pss | route-update [vsan vsan-id] | rsvp-messages [tunnel tunnel-id | vsan vsan-id]
| state-machine}
Syntax Description
Defaults Disabled.
Command Modes EXEC mode.
all Enables debugging for all FC tunnel features.
errors Enables debugging for FC tunnel errors.
external-events Enables debugging for external FC tunnel events.
ha Enables debugging for FC tunnel high availability (HA) events.
label-update Enables debugging for FC tunnel label updates.
mts Enables debugging for FC tunnel MTS events.
pkt Specifies debugging of packets.
pkthdr Specifies debugging of headers.
both Specifies debugging in both the transmit and receive directions.
tx Specifies debugging in the transmit direction.
rx Specifies debugging in the receive direction.
pss Enables debugging for FC tunnel PSS events.
route-update Enables debugging for FC tunnel route updates.
vsan vsan-id Specifies the VSAN ID. The range is 1 to 4093.
rsvp-messages Enables debugging for FC tunnel SNMP events
tunnel tunnel-id Specifies the tunnel ID. The range is 1 to 255.
state-machine Enables debugging for FC tunnel traces.
node Specifies the node for the packets in the receive direction.
opcode Specifies the opcode for the packets in the receive direction.
sap Specifies the sap for the packets in the receive direction.
range Specifies the integer range from 1 to 4096.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available