Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
23-31
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 23 T Commands
tcp min-retransmit-time
tcp min-retransmit-time
To control the minimum amount of time TCP waits before retransmitting, use the tcp
min-retransmit-time command. Use the no form of this command to disable this feature or revert to its
factory defaults.
tcp min-retransmit-time milliseconds
no tcp min-retransmit-time milliseconds
Syntax Description
Defaults 300 milliseconds.
Command Modes FCIP profile configuration submode.
Command History
Usage Guidelines None.
Examples The following example configures a FCIP profile:
switch# config terminal
switch(config)# fcip profile 5
switch(config-profile)#
The following example specifies the minimum TCP retransmit time for the TCP connection:
switch(config-profile)# tcp min-retransmit-time 500
Related Commands
milliseconds Specifies the time in milliseconds. The range is 200 to 5000.
Release Modification
1.1(1) This command was introduced.
Command Description
fcip profile Configures FCIP profile parameters.
show fcip profile Displays FCIP profile information.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available