Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
4-39
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear fcanalyzer
clear fcanalyzer
To clear the entire list of configured hosts for remote capture, use the clear fcanalyzer command in
EXEC mode.
clear fcanalyzer
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC.
Command History
Usage Guidelines This command clears only the list of configured hosts. Existing connections are not terminated.
Examples The following example shows how to clear the entire list of configured hosts for remote capture.
switch# clear fcanalyzer
Related Commands
Release Modification
1.0(2) This command was introduced.
Command Description
show fcanalyzer Displays the list of hosts configured for a remote capture.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available