Send documentation comments to mdsfeedback-doc@cisco.com
8-41
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 8 F Commands
fcs plat-check-global vsan
fcs plat-check-global vsan
To enable FCS platform and node name checking fabric wide, use the fcs plat-check-global vsan
command in configuration mode. To disable this feature, use the no form of the command.
fcs plat-check-global vsan vsan-id
no fcs plat-check-global vsan vsan-id
Syntax Description
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines None.
Examples
switch# config terminal
switch(config)# fcs plat-check-global vsan 2
Related Commands
vsan-id Specifies the VSAN ID for platform checking, which is from 1 to 4096.
Release Modification
1.0(2) This command was introduced.
Command Description
show fcs Displays fabric configuration server information.
To Next Page
Loading...
