Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
6-132
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 6 Debug Commands
debug xbar_driver
debug xbar_driver
To enable debugging of the crossbar driver (XBAR driver), use the debug xbar_driver command in
EXEC mode. To disable a debug command, use the no form of the command or use the no debug all
command to turn off all debugging.
debug xbar {error | flow | trace}
Syntax Description
Defaults Enabled.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the system output when the debug xbar_driver command is issued:
switch# debug xbar_driver error
switch# 2006 Jan 23 22:02:41.770329 xbar_driver: sc_stats_timer_hdlr called
2006 Jan 23 22:03:41.780356 xbar_driver: sc_stats_timer_hdlr called
2006 Jan 23 22:04:41.780356 xbar_driver: sc_stats_timer_hdlr called
2006 Jan 23 22:05:41.780357 xbar_driver: sc_stats_timer_hdlr called
2006 Jan 23 22:06:41.780356 xbar_driver: sc_stats_timer_hdlr called
2006 Jan 23 22:07:41.780359 xbar_driver: sc_stats_timer_hdlr called
2006 Jan 23 22:08:41.790341 xbar_driver: sc_stats_timer_hdlr called...
Related Commands
error Enables debugging of XBAR driver errors.
flow Enables debugging of the XBAR driver flow.
trace Enables debugging of the XBAR driver trace.
Release Modification
3.0(1) This command was introduced.
Command Description
no debug all Disables all debugging.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English