Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-260
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show port-license
show port-license
To display the licensing usage on a Cisco MDS 9124, use the show port-license command.
show port-license
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the default port activation license configuration for the Cisco MDS 9124
switch.
switch# show port-license
Available port activation licenses are 0
--------------------------------------------
Interface Port Activation License
--------------------------------------------
fc1/1 acquire
fc1/2 acquire
fc1/3 acquire
fc1/4 acquire
fc1/5 acquire
fc1/6 acquire
fc1/7 acquire
fc1/8 acquire
fc1/9 eligible
fc1/10 eligible
fc1/11 eligible
...
fc1/24 eligible
Related Commands
Release Modification
3.1(1) This command was introduced.
Command Description
port-license Makes a port eligible or ineligible to receive a license. Also used to acquire
a license for a port.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available