Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
4-35
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear debug-logfile
clear debug-logfile
To delete the debug logfile, use the clear debug-logfile command in EXEC mode.
clear debug-logfile filename
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Examples The following example shows how to clear the debug logfile.
switch# clear debug-logfile debuglog
Related Commands
filename The name (restricted to 80 characters) of the log file to be cleared. The
maximum size of the log file is 1024 bytes.
Release Modification
1.0(2) This command was introduced.
Command Description
show debug logfilw Displays the logfile contents.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available