Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
11-124
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
ivr distribute
ivr distribute
To enable Cisco Fabric Services (CFS) distribution for Inter-VSAN Routing (IVR), use the ivr
distribute command. To disable this feature, use the no form of the command.
ivr distribute
no ivr distribute
Syntax Description This command has no other arguments or keywords.
Defaults Disabled.
Command Modes Configuration mode.
Command History
Usage Guidelines None.
Examples The following example shows how to enable IVR fabric distribution.
switch# config terminal
switch(config)# ivr distribute
Related Commands
Release Modification
2.0(x) This command was introduced.
Command Description
ivr commit Commits temporary IVR configuration changes to the active configuration.
show ivr Displays IVR CFS distribution status and other details.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available