Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
3-7
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 3 B Commands
bport-keepalive
bport-keepalive
To configure keepalive responses for B port FCIP interfaces, use the bport-keepalive option. To disable
keepalive responses for B port FCIP interfaces, use the no form of the command.
bport-keepalive
no bport-keepalive
Syntax Description This command has no other arguments or keywords.
Defaults Disabled
Command Modes Interface configuration submode
Command History
Usage Guidelines Access this command from the
switch(config-if)# submode.
Examples The following example shows how to configure keepalive responses for B port FCIP interfaces.
switch# config terminal
switch(config)# interface fcip 1
switch(config-if)# bport-keepalives
Related Commands
Release Modification
1.1(1) This command was introduced.
Command Description
show interface fcip Displays an interface configuration for a specified FCIP interface.
bport Configures a B port FCIP interface.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available