Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
4-27
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear arp-cache
clear arp-cache
To clear the ARP cache table entries, use the clear arp-cache command in EXEC mode.
clear arp-cache
Syntax Description This command has no arguments or keywords.
Defaults The ARP table is empty by default.
Command Modes EXEC mode.
Command History
Examples The following example shows how to clear the arp-cache table entries.
switch# clear arp-cache
Related Commands
Release Modification
1.0(2) This command was introduced.
Command Description
show arp Displays Address Resolution Protocol (ARP) entries.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available