Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
11-128
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
ivr refresh
ivr refresh
To refresh devices being advertised by Inter-VSAN Routing (IVR), use the ivr refresh command in
EXEC mode.
ivr refresh
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example shows refresh devices being advertised by IVR.
switch# ivr refresh
Related Commands
Release Modification
2.0(2) This command was introduced.
Command Description
ivr enable Enables the Inter-VSAN Routing (IVR) feature.
ivr withdraw domain Withdraws an overlapping virtual domain from a specified VSAN.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available