Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-180
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show islb merge status
show islb merge status
To display iSCSI server load balancing (iSLB) merge status information, use the show islb merge status
command.
show islb merge status
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example shows iSLB merge status information.
switch# show islb merge status
Merge Status: SUCCESS
Related Commands
Release Modification
3.0(1) This command was introduced.
Command Description
show islb cfs-session
status
Displays iSLB session information.
show islb initiator Displays iSLB initiator information.
show islb pending Displays iSLB pending configurations.
show islb pending-diff Displays iSLB pending configuration differences.
show islb session Displays iSLB session information.
show islb status Displays iSLB CFS status information.
show islb virtual-target Displays iSLB virtual target information.
show islb vrrp Display iSLB VRRP load balancing information.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available