Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
19-5
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 19 Q Commands
qos enable
qos enable
To enable the QoS priority assignment for data traffic feature on the Cisco MDS 9000 family of switches,
use the qos enable command in configuration mode. To disable the QoS priority assignment for control
traffic feature, use the no form of the command.
qos enable
no qos enable
Syntax Description This command has no arguments or keywords.
Defaults Disabled.
Command Modes Configuration mode.
Command History
Usage Guidelines None.
Examples The following example disables the QoS priority assignment feature.
switch# config terminal
switch(config)# qos enable
Related Commands
Release Modification
1.3(1) This command was introduced.
Command Description
show qos Displays configured QoS information.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available