Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
8-71
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 8 F Commands
file
file
To access FICON configuration files in a specified VSAN, use the file command. To disable the feature
or to revert to factory defaults, use the no form of the command.
file file-name
no file file-name
Syntax Description
Defaults None.
Command Modes FICON configuration submode.
Command History
Usage Guidelines The configuration file submode allows you to create and edit FICON configuration files. If a specified
file does not exist, it is created. Up to 16 files can be saved. Each file name is restricted to 8 alphanumeric
characters.
Examples The following example accesses the FICON configuration file called IplFile1 for VSAN 2. If this file
does not exist, it is created.
switch# config terminal
switch(config)# ficon vsan 2
switch(config-ficon)# file IplFile1
switch(config-ficon-file)#
The following example deletes a previously-created FICON configuration file.
switch(config-ficon)# no file IplFileA
Related Commands
file file-name Creates or accesses the FICON configuration file in the specified VSAN
Release Modification
1.3(1) This command was introduced.
Command Description
ficon vsan Enable FICON for a VSAN.
show ficon Displays configured FICON details.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English