Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
8-40
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 8 F Commands
fcrxbbcredit extended enable
fcrxbbcredit extended enable
To enable Fibre Channel extended buffer-to-buffer credits (BB_credits), use the fcrxbbcredit extended
enable command in configuration mode. To disable the feature, use the no form of the command.
fcrxbbcredit extended enable
no fcrxbbcredit extended enable
Syntax Description This command has no other arguments or keywords.
Defaults Disabled.
Command Modes Configuration mode.
Command History
Usage Guidelines Performing the fcrxbbcredit extended enable command enables the switchport fcrxbbcredit
extended command.
Note This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class
BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Examples The following example shows how to enable Fibre Channel extended BB_credits.
switch# config terminal
switch(config)# fcrxbbcredit extended enable
The following example shows how to disable Fibre Channel extended BB_credits.
switch# config terminal
switch(config)# no fcrxbbcredit extended enable
Related Commands
Release Modification
2.0(x) This command was introduced.
Command Description
switchport fcrxbbcredit extended Configures Fibre Channel extended BB_credits on an interface.
show interface Displays interface information and status.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English