Send documentation comments to mdsfeedback-doc@cisco.com
6-93
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 6 Debug Commands
debug port-resources
debug port-resources
To enable debugging for a port resources module, use the debug port-resources command in EXEC
mode. To disable a debug command, use the no form of the command or use the no debug all command
to turn off all debugging.
debug port-channel {all | demux | deque | error | event | ha | mts | trace | warning}
no debug port-channel {all | demux | deque | error | event | ha | mts | trace | warning}
Syntax Description
Defaults Disabled.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the system output when the debug port-resources demux command is
issued:
switch# debug port-resources demux vsan 2
2006 Jan 19 22:10:59.244892 port-resources: fu_priority_select: - setting fd[5]
for select call
2006 Jan 19 22:10:59.244985 port-resources: fu_priority_select_select_queue: rou
nd credit(12)
2006 Jan 19 22:10:59.245018 port-resources: curr_q - FU_PSEL_Q_CAT_CQ, usr_q
_info(2), priority(7), credit(6), empty
2006 Jan 19 22:10:59.245051 port-resources: fu_priority_select: returning FU_PSE
L_Q_CAT_MTS queue, fd(5), usr_q_info(1)
2006 Jan 19 22:10:59.245168 port-resources: prm_get_data_from_queue(664): dequeued mts msg
(128136), MTS_OPC_DEBUG_WRAP_MSG
all Enables all port resources debug options.
demux Enables debugging of port resources messages.
deque Enables debugging of port resources message dequeues.
error Enables debugging for port resources error conditions.
event Enables debugging for port resources FSMs and events.
ha Enables debugging for port resources high availability.
mts Enables debugging for port resources message MTS events.
trace Enables debugging for port resources traces.
warning Enables debugging for port resources warning.
Release Modification
3.0(1) This command was introduced.
To Next Page
Loading...
Need help?
General
