Cisco MDS 9000 Series

Send documentation comments to mdsfeedback-doc@cisco.com
18-19
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 18 P Commands
port-security abort
port-security abort
To discard the port security Cisco Fabric Services (CFS) distribution session in progress, use the
port-security abort command in configuration mode.
port-security abort vsan vsan-id
Syntax Description
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines None.
Examples The following example shows how to discard a port security CFS distribution session in progress.
switch# config terminal
switch(config)# port-security abort vsan 33
Related Commands
vsan vsan-id Specifies the VSAN ID. The range is 1 to 4093.
Release Modification
2.0(x) This command was introduced.
Command Description
port-security distribute Enables CFS distribution for port security.
show port-security Displays port security information.