Send documentation comments to mdsfeedback-doc@cisco.com
22-72
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show fcdomain
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines Issuing the show fcdomain with no arguments displays all VSANs. The VSANs should be active or you will
get an error.
Examples The following example displays the fcdomain information for VSAN 1.
switch# show fcdomain vsan 1
The local switch is a Subordinated Switch.
Local switch run time information:
State: Stable
Local switch WWN: 20:01:00:05:30:00:51:1f
Running fabric name: 10:00:00:60:69:22:32:91
Running priority: 128
Current domain ID: 0x64(100) ß verify domain id
Local switch configuration information:
State: Enabled
Auto-reconfiguration: Disabled
Contiguous-allocation: Disabled
Configured fabric name: 41:6e:64:69:61:6d:6f:21
Configured priority: 128
Configured domain ID: 0x64(100) (preferred)
Principal switch run time information:
Running priority: 2
Interface Role RCF-reject
---------------- ------------- ------------
fc2/1 Downstream Disabled
fc2/2 Downstream Disabled
fc2/7 Upstream Disabled
---------------- ------------- ------------
The following example displays the fcdomain domain-list information for VSAN 76.
switch# show fcdomain domain-list vsan 76
Number of domains: 3
Domain ID WWN
--------- -----------------------
0xc8(200) 20:01:00:05:30:00:47:df [Principal]
0x63(99) 20:01:00:0d:ec:08:60:c1 [Local]
0x61(97) 50:00:53:0f:ff:f0:10:06 [Virtual (IVR)]
Release Modification
1.0(2) This command was introduced.
2.1(1a) The domain-list display was modified to include a virtual IVR description.
3.0(1) Added the pending, pending-diff, session-status, and status options.
To Next Page
Loading...
Need help?
General
