Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
4-46
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear fspf counters
clear fspf counters
To clear the Fabric Shortest Path First statistics, use the clear fspf counters command in EXEC mode.
clear fspf counters vsan vsan-id [interface type]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines If the interface is not specified, then all of the counters of a VSAN are cleared. If the interface is specified,
then the counters of the specific interface are cleared.
Examples The following example clears the FSPF t statistics on VSAN 1.
switch# clear fspf counters vsan 1
The following example clears FSPF statistics specific to the Fibre Channel interface in VSAN 1, Slot 9
Port 32.
switch# clear fspf counters vsan 1 interface fc 9/32
Related Commands
vsan Indicates that the counters are to be cleared for a VSAN.
vsan-id The ID of the VSAN is from 1 to 4093.
interface type (Optional). The counters are to be cleared for an interface. The interface
types are fc for Fibre Channel, and port-channel for PortChannel.
Release Modification
1.0(2) This command was introduced.
Command Description
show fspf Displays global FSPF information for a specific VSAN.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available