Send documentation comments to mdsfeedback-doc@cisco.com
22-323
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show system
show system
To display the system information, use the show system command.
show system {cores | default {switchport | zone} | directory information | error-id {hex-id | list}
| exception-info | pss shrink status [details] | redundancy status | reset-reason [module slot]
| resources | standby manual-boot | uptime}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines Use the show system redundancy status command to ensure that the system is ready to accept a
switchover.
cores Displays core transfer option.
default Displays system default values.
switchport Displays default values for switchport attributes.
zone Displays default values for a zone.
directory information Directory information of System Manager.
error-id Displays description about errors.
hex-id Specifies the error ID in hexadecimal format. The range is 0x0 to 0xffffffff.
list Specifies all error IDs.
exception-info Displays last exception log information.
pss shrink status Displays the last PSS shrink status.
details Displays detailed information on the last PSS shrink status.
redundancy status Redundancy status.
reset-reason Displays the last four reset reason codes.
module slot Specifies the module number to display the reset-reason codes.
resources Show the CPU and memory statistics.
standby manual-boot Displays the standby manual boot option.
uptime Displays how long the system has been up and running.
Release Modification
1.0(2) This command was introduced.
3.0(1) Added the zone option.
3.0(1) Added the standby manual-boot keyword.
To Next Page
Loading...
Need help?
General
