Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
8-34
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 8 F Commands
fcns proxy-port
fcns proxy-port
To register a name server proxy, use the fcns proxy-port command in configuration mode.
fcns proxy-port wwn-id vsan vsan-id
no fcns proxy-port wwn-id vsan vsan-id
Syntax Description
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines One name server can be configured to proxy another name server and name server information can be
displayed using the CLI. The name server can be viewed using the CLI or the Cisco Fabric Manager.
All name server registration requests come from the same port whose parameter is registered or changed.
If it does not, then the request is rejected.
Examples The following example shows configuring a proxy port for VSAN 2.
switch# config terminal
switch(config)# fcns proxy-port 21:00:00:e0:8b:00:26:d vsan 2
Related Commands
wwn-id Specifies the port WWN, with the format hh:hh:hh:hh:hh:hh:hh:hh.
vsan vsan-id Specifies a VSAN ID. The range is 1 to 4093.
Release Modification
1.0(2) This command was introduced.
Command Description
show fcns Displays the name server database and statistical information for a specified
VSAN or for all VSANs.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available