Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
11-4
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
in-order-guarantee
in-order-guarantee
To enable in-order delivery, use the in-order-guarantee command in configuration mode. To disable
in-order delivery, use the no form of the command.
in-order-guarantee [vsan vsan-id]
no in-order-guarantee [vsan vsan-id]
Syntax Description
Defaults Disabled.
Command Modes Configuration mode.
Command History
Usage Guidelines In-order delivery of data frames guarantees frame delivery to a destination in the same order that they
were sent by the originator.
Examples The following example shows how to enable in-order delivery for the entire switch.
switch# config terminal
switch(config)
# in-order-guarantee
The following example shows how to disable in-order delivery for the entire switch.
switch(config)# no in-order-guarantee
The following example shows how to enable in-order delivery for a specific VSAN.
switch(config)# in-order-guarantee vsan 3452
The following example shows how to disable in-order delivery for a specific VSAN.
switch(config)# no in-order-guarantee vsan 101
Related Commands
vsan vsan-id Specifies a VSAN ID. The range is 1 to 4093.
Release Modification
1.3(4) This command was introduced.
Command Description
show in-order-guarantee Displays the in-order-guarantee status.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available