Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-70
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show fcc
show fcc
To view FCC settings, use the show fcc commands.
show fcc [statistics interface {fc slot/port | fcip fcip-id | iscsi slot/port}]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays FCC information.
switch# show fcc
fcc is disabled
fcc is applied to frames with priority up to 4
statistics interface Displays FCC statistics for a specified interface.
fc slot/port Specifies a Fibre Channel interface.
fcip fcip-id Specifies an FCIP interface. The range is 1 to 255.
iscsi slot/port Specifies an iSCSI interface.
Release Modification
1.0(2) This command was introduced.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available