Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-65
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show fc2
show fc2
To display FC2 information, use the show fc2 command.
show fc2 {bind | classf | exchange | exchresp | flogi | nport | plogi | plogi_pwwn | port [brief] |
socket | sockexch | socknotify | socknport | vsan}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
bind Displays FC2 socket bindings.
classf Displays FC2 classf sessions.
exchange Displays FC2 active exchanges.
exchresp Displays FC2 active responder exchanges.
flogi Displays FC2 FLOGI table.
nport Displays FC2 local N ports.
plogi Displays FC2 PLOGI sessions.
plogi_pwwn Displays FC2 PLOGI pWWN entries.
port [brief] Displays FC2 physical port table.
socket Displays FC2 active sockets.
sockexch Displays FC2 active exchanges for each socket.
socknotify Displays FC2 local N port PLOGI/LOGO notifications for each socket.
socknport Displays FC2 local nports per each socket.
vsan Displays FC2 VSAN table.
Release Modification
1.0(2) This command was introduced.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available