Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
11-142
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
ivr zoneset rename
ivr zoneset rename
To rename an inter-VSAN routing (IVR) zone set, use the ivr zoneset rename command.
ivr zoneset rename current-name new-name
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example renames the IVR zone set from north to south.
switch# ivr zoneset rename north south
Related Commands
current-name Specifies the current zone set name. The maximum size is 64 characters.
new-name Specifies the new zone set name. The maximum size is 64 characters.
Release Modification
3.0(1) This command was introduced.
Command Description
ivr zoneset name Creates and configures an IVR zone set.
show ivr Displays IVR information.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available