Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-125
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show install all impact
Extracting “kickstart” version from image bootflash:/vk73a.
[####################] 100% -- SUCCESS
Extracting “loader” version from image bootflash:/vk73a.
[####################] 100% -- SUCCESS
Extracting “slc” version from image bootflash:/vs73a.
[####################] 100% -- SUCCESS
Compatibility check is done:
Module bootable Impact Install-type Reason
------ -------- -------------- ------------ ------
2 yes non-disruptive none
4 yes non-disruptive none
6 yes non-disruptive none
9 yes non-disruptive none
Images will be upgraded according to following table:
Module Image Running-Version New-Version Upg-Required
------ ---------- -------------------- -------------------- ------------
2 slc 1.2(1) 1.2(1) no
2 bios v1.0.7(03/20/03) v1.0.7(03/20/03) no
4 slc 1.2(1) 1.2(1) no
4 ilce 1.2(1) 1.2(1) no
4 bios v1.0.7(03/20/03) v1.0.7(03/20/03) no
6 system 1.2(1) 1.2(1) no
6 kickstart 1.2(1) 1.2(1) no
6 bios v1.0.7(03/20/03) v1.0.7(03/20/03) no
6 loader 1.0(3a) 1.0(3a) no
9 slc 1.2(1) 1.2(1) no
9 bios v1.0.7(03/20/03) v1.0.7(03/20/03) no
The following command displays the error message that is displayed if a wrong image is provided.
switch# show install all impact system bootflash:
Compatibility check failed. Return code 0x40930003 (Invalid bootvar specified in
the input).

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available