Cisco MDS 9000 Series

Send documentation comments to mdsfeedback-doc@cisco.com
6-122
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 6 Debug Commands
debug ttyd
debug ttyd
To enable TTYD debugging, use the debug ttyd command in EXEC mode. To disable a debug
command, use the no form of the command or use the no debug all command to turn off all debugging.
debug ttyd {all | errors | events}
no debug ttyd {all | errors | events}
Syntax Description
Defaults Disabled.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the system output when the debug ttyd events command is issued:
switch# debug ttyd events
Related Commands
all Enables debugging for all TTYD features.
errors Enables debugging for TTYD error conditions.
events Enables debugging for TTYD events.
Release Modification
1.0(2) This command was introduced.
Command Description
no debug all Disables all debugging.