Send documentation comments to mdsfeedback-doc@cisco.com
22-163
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show ipv6 routing
show ipv6 routing
To display IPv6 unicast routing information, use the show ipv6 routing command.
show ipv6 routing
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples
switch# show ipv6 routing
ipv6 routing is enabled
Related Commands
Release Modification
3.1(0) This command was introduced.
Command Description
ipv6 routing Enables IPv6 unicast routing.
To Next Page
Loading...
