Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
8-20
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 8 F Commands
fcdomain commit vsan
fcdomain commit vsan
To commit cached data and release the lock, use the fcdomain commit vsan command.
fcdomain commit vsan vsan-id |
Syntax Description
Defaults Enabled.
Command Modes Configuration mode.
Command History
Usage Guidelines None.
Examples The following examples show how to commit cached data.
switch# config terminal
switch(config)# fcdomain commit vsan 10
Related Commands
vsan-id Specifies a VSAN ID. The range is 1 to 4093.
Release Modification
3.0(1) This command was introduced.
Command Description
fcdomain Configures Fibre Channel domain features.
fcdomain abort vsan Flushes cached data without committing and releases the lock.
show fcdomain Displays global information about the FC domain configurations.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available