Send documentation comments to mdsfeedback-doc@cisco.com
22-21
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show cdp
The following example displays the specified CDP neighbor (detail).
switch# show CDP neighbors interface gigabitethernet 4/1 detail
----------------------------------------
Device ID:0
Entry address(es):
IP Address: 0.0.0.0
Platform: DS-X9530-SF1-K9, Capabilities: Host
Interface: GigabitEthernet4/1, Port ID (outgoing port): GigabitEthernet4/1
Holdtime: 144 sec
Version:
1.1(0.144)
Advertisement Version: 2
Duplex: full
The following example displays CDP traffic statistics for the management interface.
switch# show cdp traffic interface mgmt 0
----------------------------------------
Traffic statistics for mgmt0
Input Statistics:
Total Packets: 1148
Valid CDP Packets: 1148
CDP v1 Packets: 1148
CDP v2 Packets: 0
Invalid CDP Packets: 0
Unsupported Version: 0
Checksum Errors: 0
Malformed Packets: 0
Output Statistics:
Total Packets: 2329
CDP v1 Packets: 1164
CDP v2 Packets: 1165
Send Errors: 0
The following example displays CDP traffic statistics for the Gigabit Ethernet interface.
switch# show cdp traffic interface gigabitethernet 4/1
----------------------------------------
Traffic statistics for GigabitEthernet4/1
Input Statistics:
Total Packets: 674
Valid CDP Packets: 674
CDP v1 Packets: 0
CDP v2 Packets: 674
Invalid CDP Packets: 0
Unsupported Version: 0
Checksum Errors: 0
Malformed Packets: 0
Output Statistics:
Total Packets: 674
CDP v1 Packets: 0
CDP v2 Packets: 674
Send Errors: 0