Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-52
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show debug
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example shows all debug commands configured on the switch.
switch# show debug
Show Debug all
ILC helper:
ILC_HELPER errors debugging is on
SCSI Flow Manager:
Error debugging is on
switch#
The following example displays the debug messages in the specified debug log file.
switch# show debug logfile SampleFile
2004 Jun 28 00:14:17 snmpd[2463]: header_fspfLinkEntry : Sending GETNEXT request
for fspfLsrTable for vsanIndex =0,fspfLsrDomainId = 0, fspfLsrType = 0
2004 Jun 28 00:14:17 snmpd[2463]: header_fspfLinkEntry : Sending GETNEXT request
for fspfLsrTable for vsanIndex =0,fspfLsrDomainId = 0, fspfLsrType = 0
2004 Jun 28 00:14:17 snmpd[2463]: header_fspfLinkEntry : Recd rsp for GETNEXT fo
r entry (vsanIndex=1,fspfLsrDomainId = 10, fspfLsrType=0, fspfLinkIndex = 1,fspf
LinkNbrDomainId = 84, fspfLinkPortIndex = 67331,fspfLinkNbrPortIndex = 66064, fs
pfLinkType = 1,fspfLinkCost = 500
2004 Jun 28 00:14:17 snmpd[2463]: header_fspfLinkEntry : Sending GETNEXT request
for fspfLsrTable for vsanIndex =1,fspfLsrDomainId = 209, fspfLsrType = 0
2004 Jun 28 00:14:17 snmpd[2463]: header_fspfLinkEntry : Sending GETNEXT request
for fspfLsrTable for vsanIndex =16777216,fspfLsrDomainId = 3506438144, fspfLsr
Type = 0
2004 Jun 28 00:14:17 snmpd[2463]: header_fspfLinkEntry : Sending GETNEXT request
for fspfLsrTable for vsanIndex =33554432,fspfLsrDomainId = 4009754624, fspfLsr
Type = 16777216
vsan Displays debugging flags for the VSAN manager.
vshd Displays the debugging flags for VSHD.
wwn Displays the debugging flags for the WWN manager.
xbar Displays the debugging flags for XBAR.
xbc Displays the debugging flags for XBC.
zone Displays the debugging flage for the zone server.
Release Modification
1.0(2) This command was introduced.
3.0(1) Added the cloud option.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available