Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-96
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show fcs
This command displays FCS statistics.
switch# show fcs statistics
FCS Statistics for VSAN: 1
---------------------------
FCS Rx Get Reqs :2
FCS Tx Get Reqs :7
FCS Rx Reg Reqs :0
FCS Tx Reg Reqs :0
FCS Rx Dereg Reqs :0
FCS Tx Dereg Reqs :0
FCS Rx RSCNs :0
FCS Tx RSCNs :3
FCS Rx RJTs :3
FCS Tx RJTs :0
FCS Rx ACCs :4
FCS Tx ACCs :2
FCS No Response :0
FCS Retransmit :0
FCS Statistics for VSAN: 30
---------------------------
FCS Rx Get Reqs :2
FCS Tx Get Reqs :2
FCS Rx Reg Reqs :0
FCS Tx Reg Reqs :0
FCS Rx Dereg Reqs :0
FCS Tx Dereg Reqs :0
FCS Rx RSCNs :0
FCS Tx RSCNs :0
FCS Rx RJTs :0
FCS Tx RJTs :0
FCS Rx ACCs :2
FCS Tx ACCs :2
FCS No Response :0
FCS Retransmit :0

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available