Send documentation comments to mdsfeedback-doc@cisco.com
22-105
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show ficon
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines If FICON is not enabled on a VSAN, you will not be able to view FICON configuration information for
that VSAN.
Examples The following example displays configured FICON information.
switch# show ficon
Ficon information for VSAN 20
Ficon is online
VSAN is active
Host port control is Enabled
Host offline control is Enabled
User alert mode is Enabled
SNMP port control is Enabled
Host set director timestamp is Enabled
Active=Saved is Disabled
Number of implemented ports are 240
Key Counter is 73723
FCID last byte is 0
Date/Time is set by host to Sun Jun 26 00:04:06.991999 1904
Device allegiance is locked by Host
Codepage is us-canada
Saved configuration files
IPL
_TSIRN00
The following example displays the default prohibit state.
switch# show ficon port default-state
Port default state is allow-all
The following example displays assigned FICON port numbers.
switch# show ficon port-numbers assign
ficon slot 1 assign port-numbers 0-31
ficon slot 2 assign port-numbers 32-63
ficon slot 3 assign port-numbers 64-95
ficon slot 4 assign port-numbers 96-127
ficon logical-port assign port-numbers 128-153
Release Modification
1.3(1) This command was introduced.
3.0(1)
• Added the port-numbers and stat options.
• Added the portnumber keyword.
3.0(2) Added the port default-state option.
To Next Page
Loading...
Need help?
General
