Cisco MDS 9000 Series

Send documentation comments to mdsfeedback-doc@cisco.com
22-107
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show ficon
0 invalid transmission words
1 lrr input, 0 ols input, 5 ols output
0 error summary
The following example displays the contents of the specified FICON configuration file.
switch# show ficon vsan 3 file IPL
FICON configuration file IPL in vsan 3
Port address 1
Port name is
Port is not blocked
Prohibited port addresses are 0,81-253,255
Port address 2
Port name is
Port is not blocked
Prohibited port addresses are 0,81-253,255
Port address 3
Port name is
Port is not blocked
Prohibited port addresses are 0,81-253,255
Port address 4
Port name is
Port is not blocked
Prohibited port addresses are 0,81-253,255
...
Port address 80
Port name is
Port is not blocked
Prohibited port addresses are 0,81-253,255
Port address 254
Port name is
Port is not blocked
Prohibited port addresses are 0,81-253,255
The following example displays all FICON configuration files.
switch# show ficon vsan 2
Ficon information for VSAN 2
Ficon is enabled
VSAN is active
Host control is Enabled
Host offline control is Enabled
Clock alert mode is Disabled
User alert mode is Disabled
SNMP control is Disabled
Active=Saved is Disabled
Number of implemented ports are 240
Key Counter is 9
FCID last byte is 0
Date/Time is same as system time (Sun Dec 14 01:26:30.273402 1980)
Device Allegiance not locked
Codepage is us-canada
Saved configuration files
IPL
IPLFILE1