Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
2-7
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 2 A Commands
aaa authentication login
The following example turns off password validation.
switch(config)# aaa authentication login default none
The following example reverts to the local authentication method (default).
switch(config)# no aaa authentication login default group TacServer
The following example enables MS-CHAP authentication for login.
switch(config)# aaa authentication login mschap enable
The following example reverts to the default authentication method for login, which is the Password
Authentication Protocol (PAP).
switch(config)# no aaa authentication login mschap enable
Related Commands Command Description
show aaa authentication Displays the configured authentication methods.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available