Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-178
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show islb initiator
show islb initiator
To display iSCSI server load balancing (iSLB) Cisco Fabric Services information, use the show islb
initiator command.
show islb initiator [name node-name [detail | fcp-session [detail] | iscsi-session [detail]] |
configured [name initiator-name] | detail | fcp-session [detail] | iscsi-session [detail] |
summary [name]]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example shows iSLB initiator configuration information.
switch# show islb initiator configured
iSCSI Node name is 1.1.1.1
No. of PWWN: 2
Port WWN is 23:01:00:0c:85:90:3e:82
Port WWN is 23:02:00:0c:85:90:3e:82
Load Balance Metric: 1000
Number of Initiator Targets: 0
iSCSI Node name is 2.2.2.2
Load Balance Metric: 1000
Number of Initiator Targets: 0
name node-name Displays the initiator node name. The maximum size is 80.
detail Displays more detailed information.
fcp-session Displays Fbire Channel session details.
iscsi-session Displays iSLB session details.
configured Displays iSLB initiator configured information.
name initiator-name Displays the configured initiator name. The maximum size is 223.
summary Displays iSLB initiator summary information.
Release Modification
3.0(1) This command was introduced.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available