Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-213
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show logging
Usage Guidelines None.
Examples The following example displays current system message logging.
switch# show logging
Logging console: enabled (Severity: notifications)
Logging monitor: enabled (Severity: information)
Logging linecard: enabled (Severity: debugging)
Logging server: enabled
{172.22.0.0}
server severity: debugging
server facility: local7
{172.22.0.0}
server severity: debugging
server facility: local7
Logging logfile: enabled
Name - external/sampleLogFile: Severity - notifications Size - 3000000
syslog_get_levels :: Error(-1) querying severity values for fcmpls at SAP 30
syslog_get_levels :: Error(-1) querying severity values for fcfwd at SAP 38
Facility Default Severity Current Session Severity
-------- ---------------- ------------------------
kern 6 4
user 3 3
mail 3 3
daemon 7 7
auth 0 0
syslog 3 3
lpr 3 3
news 3 3
uucp 3 3
cron 3 3
authpriv 3 3
ftp 3 3
local0 3 3
local1 3 3
local2 3 3
local3 3 3
local4 3 3
local5 3 3
local6 3 3
local7 3 3
fspf 3 3
fcdomain 2 2
module 5 5
zone 2 2
vni 2 2
ipconf 2 2
ipfc 2 2
xbar 3 3
fcns 2 2
fcs 2 2
acl 2 2
tlport 2 2
port 5 5
port_channel 5 5
fcmpls 0 0
wwn 3 3
fcc 2 2
qos 3 3

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available