Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-222
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show logging
----------------------------
Module: 2
----------------------------
OBFL: Register Log:
----------------------------
Module: 2
----------------------------
OBFL: Miscellaneous Error Logs:
----------------------------
Module: 2
----------------------------
LC Config Record: Wed Nov 9 12:05:40 2005@471600
lc_copy_from_sup_to_lc() failure for sdwrap: 121
OBFL: Status:
Module: 5 OBFL Log: Enabled
error-stats Enabled
exception-log Enabled
miscellaneous-error Enabled
obfl-log (boot-uptime/device-version/obfl-history) Enabled
system-health Enabled
stack-trace Enabled
OBFL: Memory Leak:
----------------------------
Module: 5
----------------------------
mem-leak: This option not supported on SUP.
OBFL: Stack Trace:
----------------------------
Module: 5
----------------------------
stack-trace: This option not supported on SUP.
OBFL: Environment History:
----------------------------
Module: 5
----------------------------
========== Sensor Temperature History Log ==========
----------------------------------------------------
Wed Nov 9 12:05:06 2005 sensor 0 temperature 36
Wed Nov 9 12:05:06 2005 sensor 1 temperature 35
Wed Nov 9 12:05:06 2005 sensor 2 temperature 31
OBFL: Interrupt Statistics:
----------------------------
Module: 5
----------------------------
interrupt-stats: This option not supported on SUP.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available