Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-262
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show port-resources module
fc2/8 16 4.0 shared
fc2/9 16 4.0 shared
fc2/10 16 4.0 shared
fc2/11 16 4.0 dedicated
fc2/12 16 4.0 dedicated
Port-Group 3
Total bandwidth is 12.8 Gbps
Total shared bandwidth is 4.8 Gbps
Allocated dedicated bandwidth is 8.0 Gbps
--------------------------------------------------------------------
Interfaces in the Port-Group B2B Credit Bandwidth Rate Mode
Buffers (Gbps)
--------------------------------------------------------------------
fc2/13 16 4.0 shared
fc2/14 16 4.0 shared
fc2/15 16 4.0 shared
fc2/16 250 4.0 dedicated
fc2/17 16 2.0 dedicated
fc2/18 16 2.0 dedicated
Port-Group 4
Total bandwidth is 12.8 Gbps
Total shared bandwidth is 0.8 Gbps
Allocated dedicated bandwidth is 12.0 Gbps
--------------------------------------------------------------------
Interfaces in the Port-Group B2B Credit Bandwidth Rate Mode
Buffers (Gbps)
--------------------------------------------------------------------
fc2/19 16 1.0 shared
fc2/20 16 1.0 shared
fc2/21 16 1.0 shared
fc2/22 16 4.0 dedicated
fc2/23 16 4.0 dedicated
fc2/24 16 4.0 dedicated
Related Commands Command Description
show module Verifies the status of a module.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available