Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-306
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show sdv
The following example displays merge status.
switch# show sdv merge status vsan 1
Merge Status for VSAN : 1
-----------------------------
Last Merge Time Stamp : None
Last Merge State : None
Last Merge Result : SUCCESS
Last Merge Failure Reason: None [cfs_status: 0]
Related Commands Command Description
sdv enable Enables the SAN device virtualization feature.
sdv virtual-device Specifies the virtual target.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available