Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-311
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show span session
The following example displays all SPAN sessions.
switch# show span session
Session 1 (inactive as no destination)
Destination is not specified
Session filter vsans are 1
No ingress (rx) sources
No egress (tx) sources
Session 2 (active)
Destination is fc9/5
No session filters configured
Ingress (rx) sources are
vsans 1
sup-fc0,
Egress (tx) sources are
sup-fc0,
The following example displays a SPAN session mapped to a FC tunnel interface.
switch# show span session
Session 2 (active)
Destination is fc-tunnel 100
No session filters configured
Ingress (rx) sources are
fc2/16,
Egress (tx) sources are
fc2/16,

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available