Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-362
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show vsan
loadbalancing:src-id/dst-id/oxid
operational state:up
vsan 2 information
name:VmVSAN state:active
interoperability mode:default
loadbalancing:src-id/dst-id/oxid
operational state:up
vsan 3 information
name:Disk_A state:active
interoperability mode:default
loadbalancing:src-id/dst-id/oxid
operational state:up
vsan 4 information
name:Host_B state:active
interoperability mode:default
loadbalancing:src-id/dst-id/oxid
operational state:up
vsan 4094:isolated_vsan
switch# show vsan membership interface fv 2/1/3 , fv2/1/5 - 7
fv2/1/3
vsan:2
allowed list:1-4093
fv2/1/5
vsan:3
allowed list:1-4093
fv2/1/6
vsan:4
allowed list:1-4093
fv2/1/7
vsan:4
allowed list:1-409
switch# sh vsan membership interface bay 12
bay12
vsan:1
allowed list:1-4093

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available