Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
27-10
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 27 Z Commands
zone convert zone
Examples The following example shows the zone member type conversion.
switch# show zoneset name zs1
zoneset name zs1 vsan 1
zone name zone2 vsan 1
fcid 0x0b04d3
fcid 0x0b04cd
fcid 0x0b04ce
fcid 0x0b04d1
fcid 0x0b04d2
zone name zone1 vsan 1
fcid 0x0b04d6
fcid 0x0b04d9
switch# conf t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# zone convert zoneset name zs1 fcid pwwn vsan 1
switch(config)# ex
switch# show zoneset name zs1
zoneset name zs1 vsan 1
zone name zone2 vsan 1
pwwn 22:00:00:0c:50:02:cf:56
pwwn 22:00:00:0c:50:02:cf:72
pwwn 22:00:00:0c:50:02:ca:b5
pwwn 22:00:00:0c:50:02:cb:43
pwwn 22:00:00:0c:50:02:cd:c0
zone name zone1 vsan 1
pwwn 22:00:00:0c:50:02:cb:0c
pwwn 22:00:00:0c:50:02:c9:a2
Related Commands Command Description
show zone Displays the zone information.
show zoneset Displays the configured zone sets.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available