Send documentation comments to mdsfeedback-doc@cisco.com
4-11
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
cfs ipv4 distribute
The following example shows how to reenable CFS IPv4 distribution.
switch# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# cfs ipv4 distribute
Related Commands Command Description
cfs ipv4 mcast-address Configures an IPv4 multicast address for Cisco Fabric Services (CFS)
distribution over IPv4.
show cfs status Displays whether CFS distribution is enabled or disabled.
To Next Page
Loading...
