Send documentation comments to mdsfeedback-doc@cisco.com
4-125
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
crypto key generate rsa
The following example shows how to generate an exportable RSA key with the switch name as the
default label and 512 as the default modulus.
switch# config terminal
switch(config)# crypto key generate rsa exportable
Related Commands Command Description
crypto key zeroize rsa Deletes RSA key pair configurations.
rsakeypair Configures trust point RSA key pair details.
show crypto key
mypubkey rsa
Displays information about configured RSA key pairs.
To Next Page
Loading...
