Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
4-132
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
crypto transform-set domain ipsec
Examples The following example shows how to configure an IPsec transform set.
switch# config terminal
switch(config)# crypto transform-set domain ipsec Set1 esp-aes 128
Related Commands Command Description
clear crypto sa domain ipsec Clears security associations.
crypto ipsec enable Enables IPsec.
show crypto transform-set
domain ipsec
Displays IPsec crypto transform set information.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available