Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
5-6
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 5 D Commands
delete
The following example deletes a file from a directory.
switch# delete dns_config.cfg
The following example deletes a file from an external CompactFlash (slot0).
switch# delete slot0:dns_config.cfg
The following example deletes the entire my-dir directory and all its contents:
switch# delete bootflash:my-dir
The following example deletes the entire user created dk log file on the active supervisor:
switch# delete log://sup-active/
log://sup-active/dk log://sup-active/dmesg log://sup-active/messages
switch# delete log://sup-active/dk
switch# dir log:
31 Feb 04 18:22:03 2005 dmesg
14223 Feb 04 18:25:30 2005 messages
Usage for log://sup-local
35393536 bytes used
174321664 bytes free
209715200 bytes total
switch#
Related Commands Command Description
cd Changes the default directory or file system.
dir Displays a list of files on a file system.
show boot Displays the contents of the BOOT environment variable, the name of the
configuration file pointed to by the CONFIG_FILE environment variable, the
contents of the BOOTLDR environment variable, and the configuration
register setting.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available