Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
6-12
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 6 Debug Commands
debug cdp
Examples The following example displays the system output when the debug cdp events packets command is
issued:
switch# debug cdp events packets
Apr 8 21:22:34 cdp: Sent CDP packet, interface 0x2380000
Apr 8 21:22:34 cdp: Sent CDP packet, interface 0x2381000
Apr 8 21:22:35 cdp: Sent CDP packet, interface 0x2382000
Apr 8 21:22:35 cdp: Sent CDP packet, interface 0x2383000
Apr 8 21:22:51 cdp: Received CDP packet, interface 0x5000000
Apr 8 21:23:01 cdp: Sent CDP packet, interface 0x5000000
Apr 8 21:23:34 cdp: Sent CDP packet, interface 0x2380000
Apr 8 21:23:34 cdp: Sent CDP packet, interface 0x2381000
Apr 8 21:23:35 cdp: Sent CDP packet, interface 0x2382000
...
Related Commands Command Description
no debug all Disables all debugging.
show cdp Displays CDP parameters configured globally or for a specific interface.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available