Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
xlvii
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
New and Changed Information
SANTap clear santap module command C Commands
santap module command (cvt-name, dvt,
target-pwwn, target-vsan, dvt-name,
dvt-vsan, dvt-port, lun-size-handling, and
io-timeout options)
S Commands
Troubleshooting show tech-support command (fcdomain,
port-channel, and zone options)
Show Commands
Zoning clear zone command (lock option) C Commands
system default zone default-zone permit
command
system default zone distribute full command
S Commands
show system command (zone option)
show zone analysis command
Show Commands
zone compact vsan command
zone default-zone command (added Usage
Guidelines)
zoneset (configuration mode) command
(added Usage Guidelines)
Z Commands
Table 1 New and Changed Commands in the Cisco MDS 9000 Family Command Reference (continued)
Feature Description Where Documented

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available